Sponsor Directory

22' Rescue vessel for Lake Oswego Fire and Rescue

Moderator: Maxrat

22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Tue Nov 21, 2017 6:48 pm

Here is a new boat we started. 22'er for Lake Oswego, OR Fire Department. It will be powered by a 6.2L DI and Hami 213.

Image

Image

Image
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby falling rock » Wed Nov 22, 2017 9:56 am

What is beam and bottom width? Nice boat
falling rock
Deck Swab
 
Posts: 25
Joined: Tue Nov 17, 2015 5:35 pm

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Riverjohn » Wed Nov 22, 2017 9:57 am

Maxrat wrote:Here is a new boat we started. 22'er for Lake Oswego, OR Fire Department. It will be powered by a 6.2L DI and Hami 213.

Image

Image

Image

Nice! And close to home for a change. :-D
User avatar
Riverjohn
Captain
 
Posts: 1408
Joined: Thu Jan 31, 2008 4:08 pm

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Thu Nov 23, 2017 10:20 pm

falling rock wrote:What is beam and bottom width? Nice boat


It's a 6.5' bottom and 8.5' beam, engine forward with full hard top, center helm.
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Benny » Fri Nov 24, 2017 6:32 am

Nice Tom,would like to see that one in action or maybe drive. Go for a sea trial on the clack?
Benny
Boat Enthusiast
 
Posts: 241
Joined: Sat Oct 31, 2015 7:57 am

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Thu Nov 30, 2017 5:12 am

Benny wrote:Nice Tom,would like to see that one in action or maybe drive. Go for a sea trial on the clack?


You're welcome on the sea trial Benny but not on the Clack, I'll let them put first dent in it, not that you would on the Clack but I might.
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Sat Dec 02, 2017 3:02 pm

Some progress pics

Image

Image

Image
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Wed Dec 13, 2017 5:40 pm

Some new pics

Image

Image

Image
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Wed Dec 20, 2017 4:31 pm

Some new pics

Image

Image
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Thu Jan 04, 2018 4:00 pm

Getting ready for jet and engine

Image

Image

Image

Image
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Thu Feb 01, 2018 4:44 pm

The engine arrived today. It's even the fire department's fav color.

Image

Image

Image
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby NoProplem » Thu Feb 01, 2018 5:14 pm

I went back to your first post on this one to check my memory, that doesn't look like a 6.2DI...!
NoProplem
Master Baiter
 
Posts: 615
Joined: Thu Oct 30, 2014 7:01 pm

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Eagle1 » Thu Feb 01, 2018 7:15 pm

That's is a FoMoCo 440 Raptor and a 213.

Eagle1
User avatar
Eagle1
Captain
 
Posts: 3098
Joined: Sat Nov 03, 2007 1:43 am

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Fri Feb 02, 2018 5:17 am

NoProplem wrote:I went back to your first post on this one to check my memory, that doesn't look like a 6.2DI...!


You're correct. The customer came to the Portland Boat show and had a long talk with Chris and opted for the Raptor.
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Ahusk » Sat Feb 03, 2018 8:54 am

Man I wouldn't want to be stuck in need of rescue and having to rely on that Ford motor to actually make it. :)
Ahusk
First Mate
 
Posts: 773
Joined: Tue Oct 09, 2007 11:13 pm
Location: Albany, Oregon

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Benny » Sat Feb 03, 2018 9:35 am

O boy Al!! Did you forget what motor the tow boat on the Deschutes last year was powered with??
Benny
Boat Enthusiast
 
Posts: 241
Joined: Sat Oct 31, 2015 7:57 am

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Riverjohn » Sat Feb 03, 2018 9:58 am

Ahusk wrote:Man I wouldn't want to be stuck in need of rescue and having to rely on that Ford motor to actually make it. :)

Benny wrote:O boy Al!! Did you forget what motor the tow boat on the Deschutes last year was powered with??


Talk like that could anger the Young Raptor. Ahusk might want to think about his comment should he ever need a tow. The Raptor might just give him a rope snapping snort in a very inopportune spot :Scared: :rowing: ;)
User avatar
Riverjohn
Captain
 
Posts: 1408
Joined: Thu Jan 31, 2008 4:08 pm

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby desperado » Sun Feb 04, 2018 1:27 pm

Maxrat

With this 440 motor what impeller are you going to run and what wide open RPM do you expect and top speed. Also where or what elevation will this boat primarily live at? Do you expect any slippage with this setup coming out of the hole? How heavy do you think this boat will be when finished and how heavy loads will it typically be carrying. Good looking boat! Thanks
desperado
Buoy Boy
 
Posts: 156
Joined: Fri Oct 08, 2010 8:48 pm
Location: New Meadows ID

Re: 22' Rescue vessel for Lake Oswego Fire and Rescue

Postby Maxrat » Sat Feb 10, 2018 5:42 am

desperado wrote:Maxrat

With this 440 motor what impeller are you going to run and what wide open RPM do you expect and top speed. Also where or what elevation will this boat primarily live at? Do you expect any slippage with this setup coming out of the hole? How heavy do you think this boat will be when finished and how heavy loads will it typically be carrying. Good looking boat! Thanks


We have a 4.0 in that 213. I've heard anywhere between 4200 and 4400. I've never ran one so I can't get you any true numbers until I sea trial it.
User avatar
Maxrat
Forum Page Sponsor
 
Posts: 926
Joined: Fri Oct 12, 2007 11:09 pm
Location: Vancouver, WA


Return to Precision Weld Custom Jet Boats

Who is online

Users browsing this forum: No registered users and 1 guest

cron