Sponsor Directory

Scott 912

Moderator: Scottwaterjet

Scott 912

Postby rockchuckar » Thu Sep 07, 2017 4:18 pm

It's been a long time coming but we have just finished 10 days of intense testing of the new Scott 912 ( 9.1 in. 2 stage ) I'll have some good solid figures and numbers for those interested in about a week once we get our graphs made but I can tell you that testing went very well and in fact exceeded our expectations which were set fairly high. Until then here are a few pictures of the prototype .


100_1201.JPG
100_1202.JPG
100_1204.JPG
100_1203.JPG
User avatar
rockchuckar
Forum Sponsor
 
Posts: 875
Joined: Tue Sep 04, 2007 9:21 pm

Re: Scott 912

Postby FlyLow » Sat Sep 09, 2017 8:47 am

How much does the test boat weigh?
FlyLow
Novice Baiter
 
Posts: 346
Joined: Sat Feb 21, 2015 10:52 am

Re: Scott 912

Postby mgrant » Mon Sep 11, 2017 7:24 am

I can't wait to hear the results! :)
OutKast 24ft (self built). Fuel Injected 499 Max Wedge Mopar. Hamilton 212, impeller modified by Intermountain Machine & Fab (4.4t).
User avatar
mgrant
Master Baiter
 
Posts: 731
Joined: Wed Nov 05, 2008 8:51 pm
Location: Gold Beach, OR

Re: Scott 912

Postby rockchuckar » Mon Sep 11, 2017 11:47 am

Test boat was a 22 ft HCM with a LSA engine. Boat weighs 4500 . When we were testing we had 3 guys, 6 empty plastic 55 gallon drums , tool box, cooler of water , 1 inch pump ( to fill drums ) and 110 gallons of fuel on board . Once we got test results with that load we started filling up drums with water and tested again.
User avatar
rockchuckar
Forum Sponsor
 
Posts: 875
Joined: Tue Sep 04, 2007 9:21 pm

Re: Scott 912

Postby callingalltheshots » Sun Sep 17, 2017 5:25 pm

Well done Gentleman
2006 HCM Granite HD 1703.5 hours
https://www.facebook.com/chad.schatz
User avatar
callingalltheshots
Master Baiter
 
Posts: 568
Joined: Wed Feb 20, 2008 9:14 pm

Re: Scott 912

Postby rockchuckar » Mon Sep 18, 2017 4:16 pm

Here's a picture from testing. Full up trim with the barrels empty
HCM rooster tail.jpg
User avatar
rockchuckar
Forum Sponsor
 
Posts: 875
Joined: Tue Sep 04, 2007 9:21 pm

Re: Scott 912

Postby mgrant » Mon Sep 18, 2017 5:14 pm

Nice!
OutKast 24ft (self built). Fuel Injected 499 Max Wedge Mopar. Hamilton 212, impeller modified by Intermountain Machine & Fab (4.4t).
User avatar
mgrant
Master Baiter
 
Posts: 731
Joined: Wed Nov 05, 2008 8:51 pm
Location: Gold Beach, OR

Re: Scott 912

Postby viking » Sat Sep 23, 2017 8:57 am

GPS comparison with other pumps in same boat?
viking
Captain
 
Posts: 2407
Joined: Thu Nov 11, 2010 11:08 pm
Location: Idaho Falls

Re: Scott 912

Postby rockchuckar » Sat Sep 23, 2017 10:46 am

viking wrote:GPS comparison with other pumps in same boat?

We are working on those graphs right now. As soon as they are finished I will post them up here .
User avatar
rockchuckar
Forum Sponsor
 
Posts: 875
Joined: Tue Sep 04, 2007 9:21 pm


Return to Scott Waterjet

Who is online

Users browsing this forum: No registered users and 2 guests

cron